As we all know, there are many types of calibration boards, such as dot, checkerboard, and other types. At the same time, there are many calibration board methods, especially the halcon calibration board, which needs to use a special description file for calibration. Therefore, we need to generate a corresponding description file to use the calibration board normally. Do you know how to generate the description file of the calibration board? Here's a brief introduction
Generation method of description file of calibration board:
1. General array arrangement style
2. Hexagonal Style
For the generation method of the description file of the calibration board, we must find the corresponding operator.
Then we can fill in the parameters that need to be filled in the description file of the calibration board according to the parameters we need. The array can also be modified. Then we can select the directory and save it. In this way, we can get two files. One is the PS suffix, which can be used for direct printing processing. This is only for experiments, and has no precision requirements. The other one is the descr suffix. This is the description file with parameter introduction. If high-precision calibration board is required, the description file or parameters can be produced by the manufacturer of the calibration board.
